MOBILINK LTE CPE

MOBILINK LTE CPE

Overview

EION MOBILINK LTE CPEs are cost effective and advanced CPE data unit with built-in LTE MIMO antennas. EION MobiLink LTE CPEs uses latest 3GPP releases and categories upto Release 12 with 256QAM modulation on the Downlink, 64QAM modulation on the Uplink, 4x4 MIMO and carrier aggregation. MobiLink LTE CPE supports multiple TDD band operations and multiple operator network support is possible which allows deployment across the country with different operators. They meet the demands of fixed wireless access deployments and high-speed wireless backhaul challenges by the 4G service operators.


MobiLink 9750 CBRS Band Support CAT13/15 Outdoor LTE CPE

  • 3GPP Release 12, Cat 13/15
  • Frequency Band: B38, B40, B41, B42, B43, B48
  • Channel Bandwidth: 5, 10, 15 and 20 MHz
  • Output Power: 23dBm per Tx
  • Antenna Gain: 13dBi in 3.5 GHz, 11dBi in 2.5GHz
  • Operation Mode: 4Rx, 2Tx, 4x4 MIMO DL &CA
  • 1 x RJ45 Gigabit Ethernet Port

MobiLink 9720 Cat12 Outdoor LTE CPE

  • Cost-effective & compact design with built-in high-gain LTE antenna
  • 3GPP Release 12, Cat 12
  • Frequency Band: B42, B43, B48 (3.4 to 3.8GHz)
  • Channel Bandwidth: 5, 10, 15 and 20 MHz
  • Output Power: 23 dBm per Tx
  • Antenna Gain Options (Integrated):
    • 13 dBi
    • 17 dBi
    • 20 dBi (1Tx 2Rx)
  • DL MIMO 4x4
  • 1 x RJ45 Gigabit Ethernet Port
  • IPv4 and IPv6 DS-Lite Support
  • TR-069 and Web device management support
  • L2 & L3: Multiple APN; PLMN and Cell selection
  • QOS: Non-GBR, GBR

MobiLink 9700 CBRS Band Support CAT6 Outdoor LTE CPE

  • 3GPP Release 10/11, Cat 6
  • Frequency Band: B40, B41, B42, B43, B48
  • Channel Bandwidth: 5, 10, 15 and 20 MHz
  • Output Power: 23 dBm per Tx
  • Antenna Gain: 15 dBi
  • Operation Mode: 2Rx, 1Tx, DL MIMO 2x2
  • 1 x RJ45 Gigabit Ethernet Port

MobiLink 4400D CAT7 LTE Indoor CPE

  • Radio Access: 3GPP Release 10
  • Frequency Band: B3/7/20/28/38/40/41/42/43
  • Channel BW: 1.4, 3, 5, 10, 15, 20 MHz
  • Operation Mode : TDD/FDD, 1Tx, 4Rx, 4x4 MIMO
    Modulation DL & UL: QPSK, QAM16, QAM64
    Inter and Intra band CA Support
  • Max Tx Power: 23dBm per antenna port
  • Antenna Gain: 2 - 5 dBi (700-2700MHz) 5 - 6 dBi (B42, 43, 48)
  • Data Interface: 1 RJ45 10/100/1000M ETH Port
  • WiFi Interface (Router):
    • Radio Access : 802.11b/g/n (2x2 MIMO)
    • Output Power:15± 1dBm
    • Antenna : 3 dBi built-in antenna
    • Max Users : 10